Erbium-Doped Fiber Power Amplifier (abbreviated as BA Amplifier) is used to amplify optical signals within the power range of -6dBm to +3dBm or higher. It has a maximum saturated output power of 26dBm and is commonly used to increase the launch power of laser sources.
Erbium-Doped Fiber Power Amplifier (abbreviated as BA Amplifier) is used to amplify optical signals within the power range of -6dBm to +3dBm or higher. It has a maximum saturated output power of 26dBm and is commonly used to increase the launch power of laser sources.
Features | Applications |
n Wide operating wavelength | n Fiber Communication |
n High output power | n Fiber Sensing |
n Low Noise | n Fiber Laser |
Parameters | Unit | Typical Value | Remarks |
Operating Wavelength | nm | 1530~1565 | C-band |
Input signal power | dBm | -6~+3 | |
Saturated output power | dBm | 15/17/20/23/25/26 | @-3dBm Input |
Noise Figure | dB | ≤5.0 | @-3dBm Input |
Polarization dependent gain | dB | ≤0.3 | |
Polarization mode dispersion | ps | ≤0.5 | |
Input/Output Isolation | dB | >35 | |
Optical power monitoring | - | Output Power | |
Optical fiber and connectors | - | SMF-28,FC/APC | |
Control Mode | Automatic current control (ACC) / Automatic power control (APC) |
General Parameters | Benchtop | Module |
Control Function | Push Button/RS232 serial communication | RS232 serial communication |
Remote control port | DB9 Female | DB9 Female |
Power Supply | AC100~240V, <30W | DC5V, <15W |
Dimensions | 260(W)×280(D)×120(H)mm | 125(W)×150(D)×20(H)mm |
Operation Temperature | -5~+35°C | |
Operation Humidity | 0~70% |
Ordering Information/ Product Code | |||||
EDFA | Wavelength | Type | Saturated output power(dBm) | Fiber | Packaging |
C=C band | BA=Power Amplifier | 15/17/20/23/25/26 | SM=Single-Mode Fiber | M= Module B= Benchtop |
Erbium-Doped Fiber Power Amplifier (abbreviated as BA Amplifier) is used to amplify optical signals within the power range of -6dBm to +3dBm or higher. It has a maximum saturated output power of 26dBm and is commonly used to increase the launch power of laser sources.
Features | Applications |
n Wide operating wavelength | n Fiber Communication |
n High output power | n Fiber Sensing |
n Low Noise | n Fiber Laser |
Parameters | Unit | Typical Value | Remarks |
Operating Wavelength | nm | 1530~1565 | C-band |
Input signal power | dBm | -6~+3 | |
Saturated output power | dBm | 15/17/20/23/25/26 | @-3dBm Input |
Noise Figure | dB | ≤5.0 | @-3dBm Input |
Polarization dependent gain | dB | ≤0.3 | |
Polarization mode dispersion | ps | ≤0.5 | |
Input/Output Isolation | dB | >35 | |
Optical power monitoring | - | Output Power | |
Optical fiber and connectors | - | SMF-28,FC/APC | |
Control Mode | Automatic current control (ACC) / Automatic power control (APC) |
General Parameters | Benchtop | Module |
Control Function | Push Button/RS232 serial communication | RS232 serial communication |
Remote control port | DB9 Female | DB9 Female |
Power Supply | AC100~240V, <30W | DC5V, <15W |
Dimensions | 260(W)×280(D)×120(H)mm | 125(W)×150(D)×20(H)mm |
Operation Temperature | -5~+35°C | |
Operation Humidity | 0~70% |
Ordering Information/ Product Code | |||||
EDFA | Wavelength | Type | Saturated output power(dBm) | Fiber | Packaging |
C=C band | BA=Power Amplifier | 15/17/20/23/25/26 | SM=Single-Mode Fiber | M= Module B= Benchtop |