This laser uses a semiconductor laser chip. The professionally designed driving and temperature control circuit temperature control ensures the safe operation of the laser, stable output power and spectrum, and excellent spot quality (TEM00 mode).
This laser uses a semiconductor laser chip and is professionally designedDrive and temperature control circuitsTemperatureControl ensures safe operation of the laser, stable output power and spectrum, and excellent spot quality (TEM00 model).
Characteristics |
n Excellent spot quality |
n Spectral and power stabilization |
n Desktop and module packages |
Application |
n light spot indication |
n imaging |
n device test |
optical criterion | Unit | typical values | Remarks |
operating wavelength | nm | 405~940 | See attached table for optional wavelengths |
wavelength accuracy | nm | ±5 nm | |
working mode | - | continuous light | |
Output power | mW | 5~150 | Determine based on wavelength |
short-term stability(15 minutes) | dB | ≤ ±0.02 | equivalent≤±0.5% |
long-term stability(8 hours) | dB | ≤ ±0.05 | equivalent≤±1.2% |
pigtail type | - | single mode fiber | |
Fiber pigtail joint type | - | FC/APC |
Electrical and environmental parameters | desktop | Module |
Control mode | Press the key | RS232 serial communication |
communication interface | optional | DB9 Female |
Supply Electricity | AC100~240V , <30W | DC 5V3A |
Ruler inch | 260(W)×280(D)×120(H)mm | 125(W)×150(D)×20(H)mm |
operating temperature range | -5~+35°C | |
Operating humidity range | 0~70% | |
ordering information/Model | ||||
FL | operating wavelength(nm) | Output power(mW) | Output pigtail type | encapsulated form |
405~940 | 5/10/20/100 | SM= single mode fiber;PM= polarization maintaining fiber | M= Module;B= Desktop | |
Wavelength(nm) | 405 | 450 | 488 | 520 | 532 | 638 | 660 | 670 | 685 | 785 | 808 | 830 | 850 | 905 | 940 |
Power(mW) | 80 | 30 | 30 | 50 | 15 | 90 | 50 | 5 | 25 | 40 | 50 | 80 | 80 | 80 | 150 |
mode field diameter(μm) | 3.5 | 3.5 | 3.5 | 3.5 | 3.5 | 4.0 | 4.0 | 4.0 | 4.0 | 5.0 | 5.0 | 5.5 | 5.5 | 6.0 | 6.0 |
NA | 0.13 | 0.13 | 0.13 | 0.13 | 0.13 | 0.13 | 0.13 | 0.13 | 0.13 | 0.13 | 0.13 | 0.13 | 0.13 | 0.13 | 0.13 |
fiber type | * | 460HP (core =2.5μm) | 630-HP (core =3.5μm) | 780-HP (core =4.4μm) | |||||||||||
* Default single-mode fiber model for 450nm wavelength: Nufern S405XP (core diameter =3μm)
This laser uses a semiconductor laser chip and is professionally designedDrive and temperature control circuitsTemperatureControl ensures safe operation of the laser, stable output power and spectrum, and excellent spot quality (TEM00 model).
Characteristics |
n Excellent spot quality |
n Spectral and power stabilization |
n Desktop and module packages |
Application |
n light spot indication |
n imaging |
n device test |
optical criterion | Unit | typical values | Remarks |
operating wavelength | nm | 405~940 | See attached table for optional wavelengths |
wavelength accuracy | nm | ±5 nm | |
working mode | - | continuous light | |
Output power | mW | 5~150 | Determine based on wavelength |
short-term stability(15 minutes) | dB | ≤ ±0.02 | equivalent≤±0.5% |
long-term stability(8 hours) | dB | ≤ ±0.05 | equivalent≤±1.2% |
pigtail type | - | single mode fiber | |
Fiber pigtail joint type | - | FC/APC |
Electrical and environmental parameters | desktop | Module |
Control mode | Press the key | RS232 serial communication |
communication interface | optional | DB9 Female |
Supply Electricity | AC100~240V , <30W | DC 5V3A |
Ruler inch | 260(W)×280(D)×120(H)mm | 125(W)×150(D)×20(H)mm |
operating temperature range | -5~+35°C | |
Operating humidity range | 0~70% | |
ordering information/Model | ||||
FL | operating wavelength(nm) | Output power(mW) | Output pigtail type | encapsulated form |
405~940 | 5/10/20/100 | SM= single mode fiber;PM= polarization maintaining fiber | M= Module;B= Desktop | |
Wavelength(nm) | 405 | 450 | 488 | 520 | 532 | 638 | 660 | 670 | 685 | 785 | 808 | 830 | 850 | 905 | 940 |
Power(mW) | 80 | 30 | 30 | 50 | 15 | 90 | 50 | 5 | 25 | 40 | 50 | 80 | 80 | 80 | 150 |
mode field diameter(μm) | 3.5 | 3.5 | 3.5 | 3.5 | 3.5 | 4.0 | 4.0 | 4.0 | 4.0 | 5.0 | 5.0 | 5.5 | 5.5 | 6.0 | 6.0 |
NA | 0.13 | 0.13 | 0.13 | 0.13 | 0.13 | 0.13 | 0.13 | 0.13 | 0.13 | 0.13 | 0.13 | 0.13 | 0.13 | 0.13 | 0.13 |
fiber type | * | 460HP (core =2.5μm) | 630-HP (core =3.5μm) | 780-HP (core =4.4μm) | |||||||||||
* Default single-mode fiber model for 450nm wavelength: Nufern S405XP (core diameter =3μm)
Anhui Public Network Security Record No. 34019202000815
