The C+ L-band erbium-doped fiber amplifier can amplify C-band and L-band optical signals simultaneously. The operating wavelength covers 1528~1563nm and 1570~1603nm. It can adapt to the signal light wavelength and provide low-noise and high-efficiency optical power amplification.
C+ L-band erbium-doped fiber amplifier can amplify C-band and L-band optical signals simultaneously. The operating wavelength covers 1528~1563nm and 1570~1603nm. It can adaptively adapt to the signal light wavelength and provide low-noise and high-efficiency optical power amplification..
Characteristics | Application |
n wide wavelength range | n optical fiber sensing |
n high output power n low noise | n optical fiberCommunication n fiber laser |
Relationship between pump current and output powerP-I curve (EDFA-CL-BA-20-SM-M)
gain and noise figureNF@-3dBm input, 20dBm output (EDFA-CL-BA-20-SM-M)
optical criterion | Unit | typical values | Remarks |
wavelength range | nm | 1528~1563 | C-band |
1570~1603 | L-band | ||
Input power | dBm | -6~+3 | |
saturated output power | dBm | 15/17/20/23/25/26/27 | @-3dBm input |
noise figure | dB | ≤5.0 | @-3dBm input |
polarization dependent gain | dB | <0.3 | |
polarization mode dispersion | ps | 0.5 | |
Input/Output isolation | dB | >35 | |
optical power monitoring | - | Output optical power monitoring | |
pigtail type | - | SMF-28 | |
Fiber pigtail joint type | - | FC/APC | |
working mode | - | automatic current control(ACC)/Automatic Power Control (APC) |
Electrical and environmental parameters | desktop | Module |
Control mode | Press the key/RS232 serial communication | RS232 serial communication |
communication interface | DB9 Female | DB9 Female |
Supply Electricity | 100~240V AC,<30W | 5V DC, <20W |
Ruler inch | 260(W)×280(D)×120(H)mm | BA17~23: 125(W)×150(D)×20(H)mm |
BA25~27:125(W)×150(D)×40(H)mm | ||
operating temperature range | -5~+35°C | |
Operating humidity range | 0~70% |
ordering information/Model | |||||
EDFA | operating wavelength | amplifier type | saturated output power(dBm) | fiber type | encapsulated form |
CL=C+L band | BA=power amplifier | 15/17/20/23/25/26/27 | SM= single mode fiber | M= Module B= Desktop |
C+ L-band erbium-doped fiber amplifier can amplify C-band and L-band optical signals simultaneously. The operating wavelength covers 1528~1563nm and 1570~1603nm. It can adaptively adapt to the signal light wavelength and provide low-noise and high-efficiency optical power amplification..
Characteristics | Application |
n wide wavelength range | n optical fiber sensing |
n high output power n low noise | n optical fiberCommunication n fiber laser |
Relationship between pump current and output powerP-I curve (EDFA-CL-BA-20-SM-M)
gain and noise figureNF@-3dBm input, 20dBm output (EDFA-CL-BA-20-SM-M)
optical criterion | Unit | typical values | Remarks |
wavelength range | nm | 1528~1563 | C-band |
1570~1603 | L-band | ||
Input power | dBm | -6~+3 | |
saturated output power | dBm | 15/17/20/23/25/26/27 | @-3dBm input |
noise figure | dB | ≤5.0 | @-3dBm input |
polarization dependent gain | dB | <0.3 | |
polarization mode dispersion | ps | 0.5 | |
Input/Output isolation | dB | >35 | |
optical power monitoring | - | Output optical power monitoring | |
pigtail type | - | SMF-28 | |
Fiber pigtail joint type | - | FC/APC | |
working mode | - | automatic current control(ACC)/Automatic Power Control (APC) |
Electrical and environmental parameters | desktop | Module |
Control mode | Press the key/RS232 serial communication | RS232 serial communication |
communication interface | DB9 Female | DB9 Female |
Supply Electricity | 100~240V AC,<30W | 5V DC, <20W |
Ruler inch | 260(W)×280(D)×120(H)mm | BA17~23: 125(W)×150(D)×20(H)mm |
BA25~27:125(W)×150(D)×40(H)mm | ||
operating temperature range | -5~+35°C | |
Operating humidity range | 0~70% |
ordering information/Model | |||||
EDFA | operating wavelength | amplifier type | saturated output power(dBm) | fiber type | encapsulated form |
CL=C+L band | BA=power amplifier | 15/17/20/23/25/26/27 | SM= single mode fiber | M= Module B= Desktop |