The CL++ band ASE broadband light source is optimized based on the C and L band ASE broadband light source products, covering the wavelength range of 1523-1627nm and exceeding 100nm (completely covering the C++ and L++ bands). The output power of the single-mode fiber is greater than 100mW, suitable for applications such as optical fiber communications and optical fiber sensing.
CL++ band ASE broadband light source is based on C and L band ASE broadband light source products to optimize performance, coverage1523-1627nm Wavelength range exceeding 100nm (complete coverage of the C++ and L++ bands)，single mode fiberOutputpower is greater than100mW，suitable forOptical fiber communications,Optical fiber sensing and other applications.
Characteristics |
n spectrally flat |
n power adjustable |
n Wider spectral range |
Application |
n optical fiber sensing |
n medical imaging |
n production test |
CL++ band ASE source spectrum
optical criterion | Unit | typical values | Remarks |
Spectral range | nm | 1523~1627 | 6dB spectral range |
spectral flatness | dB | ≤6 | full-band |
≤2.5 | C++ band part | ||
≤ 2 | L++ band part | ||
output optical power | mW | 100 | |
Poweradjustment range(optionalFunction) | - | 10%~100% | may remainspectral flatness |
output isolation | dB | >35 | |
short-term stability(15 minutes) | dB | ≤ ±0.02 | equivalent≤±0.5% |
long-term stability(8 hours) | dB | ≤ ±0.05 | equivalent≤±1.2% |
polarization degreePER | dB | ≤ 0.2 | |
pigtailAndjoint type | - | SMF-28, FC/APC |
Electrical and environmental parameters | desktop | Module |
Control mode | Press the key | RS232 serial communication |
communication interface | optional | DB9 Female |
Supply Electricity | 100~240V AC,<30W | 5V DC, <30W |
Ruler inch | 260(W)×320(D)×120(H)mm | 139(W)x235(D)x70(H) |
Operating temperatureHumidityRange | -5~+35°C | |
Operating humidity range | 0~70% | |
ordering information/Model | |||||
ASE | Spectral range | Output power(mW) | * Power adjustable (optional) | Output pigtail type | encapsulated form |
CL++ | 100 | *T | SM= SMF-28 | B= Desktop M= Module | |
CL++ band ASE broadband light source is based on C and L band ASE broadband light source products to optimize performance, coverage1523-1627nm Wavelength range exceeding 100nm (complete coverage of the C++ and L++ bands)，single mode fiberOutputpower is greater than100mW，suitable forOptical fiber communications,Optical fiber sensing and other applications.
Characteristics |
n spectrally flat |
n power adjustable |
n Wider spectral range |
Application |
n optical fiber sensing |
n medical imaging |
n production test |
CL++ band ASE source spectrum
optical criterion | Unit | typical values | Remarks |
Spectral range | nm | 1523~1627 | 6dB spectral range |
spectral flatness | dB | ≤6 | full-band |
≤2.5 | C++ band part | ||
≤ 2 | L++ band part | ||
output optical power | mW | 100 | |
Poweradjustment range(optionalFunction) | - | 10%~100% | may remainspectral flatness |
output isolation | dB | >35 | |
short-term stability(15 minutes) | dB | ≤ ±0.02 | equivalent≤±0.5% |
long-term stability(8 hours) | dB | ≤ ±0.05 | equivalent≤±1.2% |
polarization degreePER | dB | ≤ 0.2 | |
pigtailAndjoint type | - | SMF-28, FC/APC |
Electrical and environmental parameters | desktop | Module |
Control mode | Press the key | RS232 serial communication |
communication interface | optional | DB9 Female |
Supply Electricity | 100~240V AC,<30W | 5V DC, <30W |
Ruler inch | 260(W)×320(D)×120(H)mm | 139(W)x235(D)x70(H) |
Operating temperatureHumidityRange | -5~+35°C | |
Operating humidity range | 0~70% | |
ordering information/Model | |||||
ASE | Spectral range | Output power(mW) | * Power adjustable (optional) | Output pigtail type | encapsulated form |
CL++ | 100 | *T | SM= SMF-28 | B= Desktop M= Module | |
Anhui Public Network Security Record No. 34019202000815
